Vinyl Plank Flooring Cost in Vancouver (2026)

How much does vinyl plank flooring cost in Vancouver?

As a general guide for the Vancouver and Lower Mainland market in 2026, installed luxury vinyl plank (LVP) and stone-polymer core (SPC) flooring lands in the ranges below. These are market guidance figures, not a quote. Your exact price depends on the product you choose, the condition of your subfloor and the layout of your space.

• Material (LVP or SPC plank): roughly $2 to $6 per square foot, depending on wear-layer thickness and brand.
• Underlay: often $0.40 to $1 per square foot, or built into the plank on click-lock products.
• Labour (supply-and-install): commonly $2 to $5 per square foot in Metro Vancouver.
• Subfloor prep and levelling: priced per project once we see the floor, since dips and moisture issues vary widely.

Put together, most homeowners budget around $7 to $9 per square foot installed for a mid-range vinyl plank floor, with simple, flat, large rooms at the lower end and small, cut-up spaces with prep work at the higher end. {/* TODO: confirm current local pricing */}

What changes the price of a vinyl plank install

Two homes of the same size can land at very different prices. The biggest drivers in our experience across the Lower Mainland are:

• Subfloor condition: levelling compound, plywood repairs and moisture barriers on concrete slabs all add cost.
• Product grade: a thicker wear layer and a rigid SPC core cost more up front but hold up better in high-traffic and below-grade rooms.
• Layout complexity: lots of doorways, closets, stairs and angled walls mean more cuts and more labour.
• Removal and disposal: tearing out old flooring, glued-down tile or carpet adds time.
• Transitions and trims: thresholds, stair nosings, baseboards or quarter round all factor in.
• Strata requirements: condo work may need acoustic underlay and proof of insurance, which can shift the product and the prep.

Is vinyl plank cheaper than laminate or hardwood?

Vinyl plank and laminate sit in a similar budget bracket, and both are well below solid hardwood on installed cost. Vinyl plank is usually chosen for water resistance rather than to save money over laminate. If you are comparing the two head to head, see our vinyl plank versus laminate guide for a side-by-side breakdown.

How to budget your Vancouver vinyl plank project

• Measure your rooms and add about 5 to 10 percent for waste and cuts.
• Decide on water resistance first: kitchens, bathrooms and basements point to SPC.
• Get the subfloor assessed early, since prep is the most common surprise cost.
• Ask for a supply-and-install quote so material and labour are not split across vendors.
• Confirm strata rules before you buy if you are in a condo.

We give free in-home quotes across Greater Vancouver, so you get a firm number for your space rather than a per-square-foot estimate.

Comparison at a glance

Vinyl plank flooring cost components in Vancouver (2026 market guidance)

Cost component	Typical range (per sq ft)	Notes
Material (LVP or SPC)	$2 to $6	Driven by wear layer and core type
Underlay	$0.40 to $1	Sometimes built into the plank
Labour (install)	$2 to $5	Higher for cut-up or stair-heavy spaces
Subfloor prep	Per project	Levelling, repairs, moisture barriers
Installed total	$5 to $12	Most homes near $7 to $9